Designed for Euro 6, smart alternator & conventional ones.
3 Power Up Control Mode : Auto-Ignition Feed ,Built-in Vibration Sensor & Input Voltage Control.
12/24V INPUT AUTO SELECT
6 BATTERY PROFILES SELECTION : 2 Each -AGM / LEAD/ LFP
3 Stage charge for Lead based & a specific 2 Stage for LFP
5 Self-Recoverable Protections & output thermal fuse wrong polarity
Bluetooth model support remote monitoring the charger health and charging stage in Smartphone
SBC-5925 is a 3 Stage DC-DC charger with 9 to 32 Volt input range and 2 selections of charging profile for each of LEAD / AGM/ Lithium Fe PO4 battery. The specific charging profile will give your selected battery type a safe, fast and complete charge. The wide input voltage range allows 12V or 24V system to charge your 12V auxiliary battery which can be installed at long distance from the starting battery as in trailer / caravan. When the unit is set at automatic ignition control mode, charging will stop when car’s ignition is turned off. The advanced micro-processor control and hardware based protections will give timely input low voltage cut off to protect your starting battery from going flat in addition to the protections listed. The wide input voltage range and the smart protections take care of the issue due fluctuating alternator voltage control in the green ECU (Engine Control Unit)
The digital control and auto-select design of SBC-5925 make it automatically adapt to 12V or 24V input alternator/ battery system.
The smart multi-stage charging enables the charger to be connected permanently to your battery banks without the worry of over charging or drying out the electrolyte.
A 3 Stage Bulk, Absorption & Float charging profile with maximum constant charging current at the Bulk Stage and a Constant Voltage with decreasing charging at the Absorption Stage and a reduced voltage Float Charge for maintenance when battery is full.