PRODUCT
Overview
DC Power Supplies
Battery Chargers
DC-DC Converters
PV Charge Controllers
Misc. Products & Accessories
SUPPORT
Driver download
Document download
Product Video
FAQ
DISTRIBUTOR
Middle East and Africa
ABOUT US
Overview
Company Statement
Quality Assurance
Green Manufacturing
OEM & ODM and Contract
News

Programmable PWM PV Charge Controller with 10 Night Light Modes

SBC-7220
Feature
24V models
SBC-7208 SBC-7212 SBC-7220 SBC-7230
24V, 10A 24V, 15A 24V, 25A 24V, 35A

User adjustable charging voltages.
Suitable for all types of lead acid batteries
Bulk, Absorption, Float stage, PV charging current, Battery voltage on LCD display.
10 selectable Night Light programs.
Add to compare list
Compare
Search
Compare

The SBC-7000 Series PV charge controller is designed for use with all types of photovoltaic panels and different types of batteries, such as wet or sealed lead acid, lead calcium, lead antimony battery.
The MCU (Microprocessor controller) is programmed with 3 stage charging algorithms and with 0~100% PWM (Pulse Width Modulation) duty cycles to provide the fastest, optimal charging current and voltages from PV panels according to the actual state of charge and type of battery.
The 3 stage (Bulk, Absorption, Float) and *Equalization* charging cycles ensure complete charging cycles and maintenance of lead acid battery automatically.
Bulk and Float threshold charge voltage levels are user adjustable to meet specific battery manufacturer’s recommendation.
*Equalization Charging is only for Wet type lead acid Battery, automatically cycles once a month for 2 hours.
Equalization Charging can be de-activated or re-activated manually.
Hence, maximum PV charging efficiency and longer the service life span of the battery are ensured.
Ampere Hour logging read outs in three sets, today and last two days are shown on the LCD. This is useful to check the condition of PV data for efficiency and actual capacity of your system.
Electronic Blocking of back current to PV and overcharging battery protection are standard.

Features

  • User adjustable charging voltages.
  • Suitable for all types of lead acid batteries.
  • Microprocessor control PWM with 3 stage charging algorithms.
  • Bulk, Absorption, Float stage, PV charging current, Battery voltage on LCD display.
  • Ampere Hour logging read outs of 3 days.
  • 5 state LED indications of battery levels with reference to PV voltage.
  • Electronic Overcharge Protection & blocking current from battery to PV panel.
  • Over Temperature Protection of controller’s electronic circuit.
  • 10 selectable Night Light programs.
  • User defined battery low voltage disconnect and reconnect for load terminal.
  • Optional remote temperature sensor for battery to provide precise right charging.
  • Optional emote signal/control terminal for synchronization of unit’s load terminal.
Battery Voltage
24VDC
Maximum PV Panel Open Circuit Voltage
52VDC
Continuous Load/Charge Current
20A
Maximum Charger Current
25A
Maximum Load Current
25A
Operating Current (no load and no PV)
≤15mA
Optimal Efficiency
-
Display
LCD + LED
Protection
Battery Reverse Polarity Protection, Over Charge/ Discharge Protection, Over Temperature Protection
LVD
Adjustable 18-30VDC
LVR
Adjustable 20-32VDC
Approvals
CE EN 55014, 60335, 62233
Dimensions
(WxHxD) 150x85x45 mm
Weight
470g
  1. Optional Remote Control/Signal Terminal (factory installed)
      It has RJ-45 socket which can:

    1. provide a close circuit and open circuit conditions.
    2. provide high/ low (12V,0V/0.1A) signal.
    3. Both A and B remotely controls the On/ Off operation of equipment such as inverter connected to the battery bank according to the
      Night Light Mode setting and LVD/ LVR protection as well.

    4. makes extended connection of the battery status LED (Red and Green) for remote monitoring of the battery conditions.
  2. Remote temperature sensor (1.8m wire length) to adjust charging voltages according to the temperature at the battery banks.
Document
SBC-7000 series catalogue
1.0
English
04/10/2018
SBC-7208 / 7212 / 7220 user manual
Rev.0
English
01/05/2009
Video
Language

Warning: Invalid argument supplied for foreach() in /home/manson7/public_html/wp-content/themes/odf-theme/template/content/single-products.php on line 465
FOLLOW US